Gastroback 40131 Vital Juicer - Manual (Page 12)

Storage
Always clean the appliance before storing (see Care and Cleaning). Ensure to store the appliance where
it is clean, dry and safe from frost, unacceptable strain (mechanical or electric shock, heat, moisture)
and where it is out of reach of young children.
DO NOT place any hard or heavy objects on the appliance.
Trouble Shooting Guide
On any problems occurring that are not mentioned here, please contact your authorised service centre.
To get more information about the appliance, contact Gastroback GmbH, Gewerbestr. 29, D-21729
Hollenstedt (Germany), Phone: +49 (4165) 81777
The Easy Solution
The appliance is possibly not assembled correctly.
Refer to Assembling the Juicer.
Immediately switch OFF the Juicer and unplug from
power outlet. Refer to Remove Blockage.
Immediately switch OFF the Juicer and unplug from
power outlet. Refer to Remove Blockage.
Try to work slower. Remove excess fibre building up in the mesh
and blocking the fine pores. Remove the filter basket and brush
out remaining pulp under running water (see Care and Cleaning).
Try to work slower. Push the food pusher down gently and slowly.
Try to work slower. Push the food pusher down gently and slowly.
Immediately switch OFF and unplug the juicer. Possibly the
filter base and/or spout is blocked. Clean the filter base
(see Care and Cleaning).
The Problem
The motor will not work,
when switched ON.
The motor appears to stick or stall.
Excessive pulp building up in
the filter basket
The pulp is too wet and you get
an insufficient amount of juice
Juice leaks between the rim of
the filter base and the juicer cover.
Juice sprays out from the spout.
Juice overflows the brim
of the motor base.
13
40131_Gebrauch_GB.qxd 07.10.2004 13:53 Uhr Seite 13