Huawei M881 User Guide - Manual (Page 34)

29
If you do not need to access a wireless data network, you can clear the Data
enabled check box to save data traffic costs.
7.2 Wi-Fi
Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile
phone, you must have an access to wireless access points (hotspots).Obstacles that
block the Wi-Fi signal will reduce its strength.
7.2.1 Turning On Wi-Fi
1. Touch > Settings.
2. Under WIRELESS & NETWORKS, touch the button next to Wi-Fi.
7.2.2 Connecting to a Wireless Network
1. After turning on Wi-Fi, touch > Settings.
2. Under WIRELESS & NETWORKS, touch Wi-Fi to display the Wi-Fi screen. You
will see a list of detected Wi-Fi networks.
3. Touch a Wi-Fi network to connect to it.
• If you select an open network, your mobile phone will automatically connect to
it.
• If you select a network that is secured with Wired Equivalent Privacy (WEP)
and it is the first time that you have connected to it, enter the password as
prompted, and then touch Connect. If you connect to a secured wireless
network that you have already used, you will not be prompted to enter the
password again unless you have reset your mobile phone to its default settings.
On the Wi-Fi settings screen, touch ADD NETWORK to add a new Wi-Fi
network.
7.3 Sharing Your Phone's Data
Connection
You can share your mobile phone's data connection with a single computer via a USB
cable: USB tethering. You can share your mobile phone's data connection with a