Hudson Medical Bariatric 3 Rehab Adjustable - Manual (Page 2)

Removable Inner Liner
Easily removed the inner urethane protective
liner with the self-contained Poly-Lite™ pressure
relief bladders.
Molded High Resilient Foam Base
Molded foam base with progressive support
technology may be custom cut if necessary
(electric knife recommended) for special sizing.
Examples: to reduce seating height for drop
seat; for leg length adjustment when one leg is
shorter and to curve a leg trough when one hip
lacks flexion.
Obliquity Adjuster Pad
Placed directly into the ischial cavity will reduce the
depth of the ischial and coccyx areas. Custom cut the
pad in half and/or on an angle and place into the
ischial cavity when instability exist or for pelvic
obliquity which aligns the hips when one hip sits lower
than the other.
Poly-Lite™ Pressure Relief Pads
Two supplemental Poly-Lite™ pressure relief pads
can be inserted into the ischial tuberosity and coccyx
cavity to prevent bottoming out. The pads can be used
in any area to reduce pressure points. The supplemen-
tal Poly-Lite™ Pads can also assist seat positioning (like
the Obliquity Pads) to align the hips.
Posterior Rotation Control Wedges
Place wedge(s) in the posterior ischial cavity to
increase hip flexion and position the hips from sliding
forward to prevent slouching or kyphotic tendency.
Use and Application of The Rehab™ Cushion
for Positioning for Pressure Relief and Comfort
The Pressure EEZ® Rehab™ Adjustable Wheelchair Cushion is uniquely
designed using a high resilient custom molded foam core in all popular sizes
to position the body for correct seating posture with a leg abduction post to
prevent hip rotation and abrasion. The molded foam core is covered in a
removable protective urethane membrane with self contained pressure
relief Poly-Lite™ pads in the ischial and coccyx areas. If seating pressure and/
or position problems still exist, remove the urethane membrane and insert
one or more of the adjustable components onto the molded foam core.
How to Customize the Pressure EEZ®
Rehab™ Adjustable Wheelchair Cushion
Simply remove the outer cover and one or more of the following compo-
nents can be inserted into the molded core for supplemental pressure relief
or positioning support.
Molded Foam Core with (PST)
Progressive Support Technology
PST produces the right degree of cushion
firmness. Smaller, lightweight clients receive a
softer more compliant cushion, average weight
clients a medium firmness and larger heavier
clients receive a firmer more supportive
cushion. The unique construction of high
resilient (HR) molded foam provides maximum
stabilization, positioning, pressure relief and
correct seating posture.
Poly-Lite™ Pressure Relief Bladders
The inner liner membrane has bladders filled
with Poly-Lite.™ A unique proprietary super light-
weight microspherical polymer that provides
the lowest pressure readings while seated
reducing the likelihood of pressure sores. Poly-
Lite™ weighs 25% the weight of gel, silicone or
water and will not freeze, heat up, evaporate,
dry out, harden, separate, bottom-out, support
a flame and is non-toxic.
Rehab™ Cushion Cover
Outer cover is a removable, washable, flame
retardant, stretch polyester knit to reduce
interface pressure and shearing. It is
constructed with a vapor permeable moisture
proof urethane backing and a non-slip bottom
for comfort and safety.
Firmness Cushion Width
Soft 10" to 14"
Medium 16" to 18"
Firm 20" to 24"
PST SIZE RANGES
HUDSON
For Adjustable Pressure Relief
Management and Position Control
Adjustable Wheelchair Cushion
™
THE REHAB THE REHAB