Casio EXILIM EX-Z27 - Manual (Page 15)

15
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for
power. Never try to use any other type of battery.
1.
Open the battery cover.
Pressing the battery cover, slide it in
the direction indicated by the arrow.
2.
Load the battery.
With the EXILIM logo on the
battery facing upwards (in the
direction of the monitor
screen), hold the stopper next
to the battery in the direction
indicated by the arrow as you
slide the battery into the
camera. Press the battery in
until the stopper secures it in
place.
3.
Close the battery cover.
Pressing the battery cover against the
camera, slide it closed.
• For information about how to replace
the battery, see page 122.
First, charge the battery prior to use.
To load the battery
2
1
EXILIM logo
Stopper
Back
Battery contacts
Front
1
2