Jeep 2006 Liberty - Manual (Page 229)

The following indicators should be used to ensure that
you have engaged the transmission shift lever into the P
(Park) position:
• When shifting into P (Park), depress the button on the
shift lever and firmly move the lever all the way
forward until it stops.
• Look at the shift indicator window on the console to
ensure it is in the P (Park) position.
• When engaged in P (Park), you will not be able to
move the shifter rearward without depressing the shift
lever button.
CAUTION!
Before moving the shift lever out of P (Park), you
must turn the ignition from LOCK to ON so the
steering wheel and shift lever are released. Other-
wise, damage to the steering column or shifter could
result.
R (Reverse)
For moving the vehicle rearward. Always stop before
moving the lever to R (Reverse), except when rocking the
vehicle.
N (Neutral)
Engine may be started in this position.
NOTE: Towing the vehicle, coasting, or otherwise driv-
ing with the transmission in N (Neutral) can cause severe
damage to the transmission.
STARTING AND OPERATING 229
5