Spare tire stowage, Preparations for jacking, Jacking instructions – Jeep 2007 Compass User Manual

Page 302

Advertising
background image

Spare Tire Stowage
The compact spare tire is stowed under the rear load floor
in the cargo area.

Spare Tire Removal
Lift up the load floor cover and remove the hold down.

Preparations For Jacking
Park the vehicle on a firm level surface, avoid ice or
slippery areas, set the parking brake and place the gear
selector in PARK (automatic transaxle) or REVERSE
(manual transaxle). Turn OFF the ignition.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.

• Turn on the Hazard Warning Flasher.

• Block both the front and rear

of the wheel diagonally oppo-
site the jacking position. For
example, if changing the right
front tire, block the left rear
wheel.

• Passengers should not remain in the vehicle while the

vehicle is being jacked.

Jacking Instructions

1. Remove the scissors jack and lug wrench from the
spare wheel as an assembly. Turn the jack screw to the left
to loosen the lug wrench, and remove the wrench from
the jack assembly.

302

WHAT TO DO IN EMERGENCIES

Advertising