Installing the soft top – Jeep 2007 Wrangler User Manual
Page 122
Advertising
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx
head driver. Recover and re-zip the sports bar cover.
Store pivot brackets and screws in a safe place.
Installing the Soft Top
NOTE:
The following procedures are for first time set
up only. For future soft top procedures, refer to “Soft
Top” in this section.
1. Locate and remove the following items prior to hard
top removal:
• Right and left door frames
• Door frame attachment knobs (4 for 2 door models,
6 for 4 door models)
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to “Freedom Top 3 —
Piece Modular Hard Top — Front/Rear Panel Removal”
later in this section.
122
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising