Distance to empty (dte), Elapsed time, Tire pressure monitor (tpm) – Jeep 2008 Compass User Manual

Page 175: Personal settings (customer programmable features), Personal settings (customer programmable, Features)

Advertising
background image

Distance To Empty (DTE)

Shows the estimated distance that can be travelled with
the fuel remaining in the tank. This estimated distance is
determined by a weighted average of the instantaneous
and average fuel economy, according to the current fuel
tank level. This is not resettable.

NOTE:

Significant changes in driving style or vehicle

loading will greatly affect the actual drivable distance of
the vehicle, regardless of the DTE displayed value.

When the DTE value is less than 30 miles estimated
driving distance, the DTE display will change to a text
display of

ЉLOW FUELЉ. This display will continue until

the vehicle runs out of fuel. Adding a significant amount
of fuel to the vehicle will turn off the

ЉLOW FUELЉ text

and a new DTE value will be displayed, based on the
current values in the DTE calculation and the current fuel
tank level.

Elapsed Time

Shows the total elapsed time of travel since the last reset
when the ignition switch is in the ACC position. Elapsed
time will increment when the ignition switch is in the ON
or START position.

Tire Pressure Monitor (TPM)

Refer to Section 5, “Tire Pressure Monitoring System
(TPMS) for system operation.

Personal Settings (Customer Programmable
Features)

This allows the driver to set and recall features when the
transmission is in PARK (automatic transmission) or the
vehicle is stopped (manual transmissions).

Press and release the EVIC button until Personal Settings
is displayed in the EVIC.

Use the EVIC button to display one of the following
choices:

UNDERSTANDING YOUR INSTRUMENT PANEL

175

4

Advertising