To release the liftgate flipper glass, Using the panic alarm – Jeep 2008 Grand Cherokee User Manual

Page 24

Advertising
background image

To Release the Liftgate Flipper Glass

Press the “Flipper Glass/Trunk Release” button on the
transmitter two times to release the flipper glass.

WARNING!

Driving with the flipper glass open can allow poi-
sonous exhaust gases into your vehicle. You and your
passengers could be injured by these fumes. Keep
the flipper glass closed when you are operating the
vehicle.

Using The Panic Alarm

To turn the panic alarm feature ON or OFF, press and
hold the PANIC button on the transmitter for at least one
second and release. When the panic alarm is on, the
headlights and park lights will flash, the horn will pulse
on and off, and the interior lights will turn on.

The panic alarm will stay on for 3 minutes unless you
turn it off by either pressing the PANIC button a second
time or drive the vehicle at a speed of 15 mph (24 km/h)
or greater.

NOTE:

• The interior lights will turn off if you turn the ignition

switch to the ACC or ON position while the panic
alarm is activated. However, the exterior lights and
horn will remain on.

• You may need to be less than 23 feet (7 meters) from

the vehicle when using the transmitter to turn off the
panic alarm due to the radio frequency noises emitted
by the system.

24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising