Jeep 2008 Liberty User Manual
Page 323
HDC control speed. Conversely, if more speed is desired
during HDC control, the accelerator pedal will increase
vehicle speed in the usual manner. When either the brake
or the accelerator is released, HDC will control the
vehicle at the original set speed.
NOTE:
HDC is available on vehicles equipped with the
MP1522 transfer case.
• The transfer case must be in 4WD low range to enable
HDC.
• HDC is enabled only when the “Hill Descent Control
Indicator” light in the instrument cluster is on solid.
• HDC will NOT activate when the automatic transmis-
sion is in “P” (Park).
• HDC will NOT activate on level ground.
• HDC will NOT activate at vehicle speeds above 30
mph (50 km/h).
The “Hill Descent” button is located in the lower switch
bank below the climate control.
Enabling HDC
Shift the transfer case into 4WD low range.
Refer to “Four-Wheel Drive Operation” in this
section for transfer case operation information.
Hill Descent Button
STARTING AND OPERATING
323
5