Jacking instructions – Jeep 2009 Grand Cherokee - Owner Manual User Manual

Page 396

Advertising
background image

WARNING!

Do not attempt to change a tire on the side of the
vehicle closest to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

2. Set the parking brake.

3. Place the shift lever into PARK.

4. Turn the ignition OFF.

5. Turn on the Hazard Warning flasher.

6. Block both the front and rear of the
wheel diagonally opposite of the jack-
ing position. For example, if changing
the right front tire, block the left rear
wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Jacking Instructions

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from

the edge of the roadway as possible before raising
the vehicle.

Block the wheel diagonally opposite the wheel to

be raised.

Set the parking brake firmly and set an automatic

transmission in PARK; a manual transmission in
REVERSE.

(Continued)

394

WHAT TO DO IN EMERGENCIES

Advertising
This manual is related to the following products: