Jeep 2009 Liberty - Owner Manual - Manual (Page 436)

• Allow the top to dry before opening. Vacuuming the
top with a wet/dry shop vacuum will decrease the
tops drying time, ensure removal of all dirt, and delete
streaks in the material.
• Multiple cleanings may be necessary to remove stub-
born stains. If stains persist, contact your local autho-
rized dealership for further suggestions.
CAUTION!
Never use an abrasive type cleaner or bleaches.
Cleaners should not contain silicones, organic sol-
vents, petroleum distillates, or plasticizers. Always
wait until the top is thoroughly dry before opening
it.
Additional Cleaning Procedure
For additional cleaning assistance in removing stubborn
stains, apply MOPAR
௡ Convertible Cloth Top Cleaner to
the complete stain, extending 2 in (50 mm) beyond the
stain. With a soft bristle brush, scrub in all directions over
the stain. Avoid heavy scrubbing. Rinse the area with
warm water. If the stain is still apparent, repeat the
cleaning procedure. When the stain is no longer showing,
rinse the complete top with warm water. Let the top dry
before opening it.
Protection
For appearance purposes, you may wish to protect the
acrylic (cloth) top periodically. A fabric protectant such as
Scotchguard
௡ is suggested. The top should be clean and
dry before application of the protectant.
CAUTION!
Avoid getting Scotchguard ௡ on the surrounding
weather strips, moldings, paint, or glass. Damage to
these items might occur.
434 MAINTAINING YOUR VEHICLE