Jeep 2009 Wrangler - Owner Manual - Manual (Page 92)

1. Remove the three rear subwoofer (if equipped)
mounting nuts using a 15 mm socket.
2. Unplug the electrical connector from the rear sub-
woofer (if equipped).
3. Fold the rear seat forward following steps 1 through 3
under “Fold and Tumble Rear Seat” in this section.
4. Press down on the release bar on each side, and pull
the seat out and away from the lower bracket.
5. Remove the seat from the vehicle.
Subwoofer
Release Bar Location
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE