Jeep 2010 Wrangler Unlimited - Owner Manual - Manual (Page 30)

2. Slide the front seat(s) fully forward.
3. Remove the trim access door from the bottom of
B-pillar.
4. Unplug the wiring harness connector.
NOTE: If the red latch on the connector is locked, push
the red latch to the right until you can only see the latch
on one end (right) of the connector. This will unlock the
connector tab, allowing the tab to be pressed down and
enabling the harness to be disconnected.
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29