Getting started – Jeep 2010 Wrangler Unlimited - User Guide User Manual

Page 15

Advertising
background image

Recliner

• Lift the rear lever located on the outboard

side of the seat, lean back and release at the
desired position.

WARNING!

Do not ride with the seatback reclined so that the seat belt is no longer resting

against your chest. In a collision, you could slide under the seat belt and be seriously

or even fatally injured. Use the recliner only when the vehicle is parked.

Driver’s and Passenger Easy Entry Seats (Two-Door)

• Push the lever on the seatback rearward

(toward the rear of the vehicle) to tilt the
entire seat forward.

• To return the seat to a sitting position, rotate

the seatback upright until it locks. Push the
seat rearward until the track locks.

NOTE:
• If equipped with a combination lever, the seatback will return to its first locked position.

The recliner handle will have to be actuated to adjust the seatback to the desired reclined
position.

• The front passenger seats have a track memory which returns the seat to just past the

halfway point of the track, regardless of its original position.

• The recliner and easy entry levers should not be used during the automatic returning of

the seat to its fully upright position.

13

GETTING STARTED

Advertising
This manual is related to the following products: