Jeep 2013 Compass - User Guide - Manual (Page 92)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant–
2.0L, 2.4L Engine
We recommend you use MOPAR ®
Antifreeze/Coolant Ten Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
7.2 Quarts (6.8 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil with Filter–
2.0L, 2.4L Engine
We recommend you use API
Certified SAE 5W-20 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to the engine oil
filler cap for correct SAE grade.
4.5 Quarts (4.26 Liters)
Fuel Selection–
2.0L, 2.4L Engine
87 Octane
13.6 Gallons (51.5 Liters)
(Approximate)
Engine Oil Filter–
2.0L, 2.4L Engine
We recommend you use MOPAR ®
Engine Oil Filters.
—
Spark Plugs– 2.0L,
2.4L Engine
We recommend you use
MOPAR ® Spark Plugs
(Gap 0.043 in [1.11 mm])
—
Automatic
Transmission (CVT)
We recommend you use
MOPAR ® CVTF + 4 ® Automatic
Transmission Fluid.
—
Manual Transmission
We recommend you use MOPAR ®
ATF+4 ® Automatic Transmission
Fluid or equivalent licensed
ATF+4 ® product.
—
Rear Drive
Assembly (RDA)
We recommend you use MOPAR ®
Gear & Axle Lubricant
SAE 80W-90 API GL 5.
—
Power Transfer
Unit (PTU)
We recommend you use MOPAR ®
Gear & Axle Lubricant SAE
80W-90 API GL 5.
—
Brake Master Cylinder
We recommend you use MOPAR ®
DOT 3 and SAE J1703 should be
used If DOT 3 is not available,
then DOT 4 is acceptable.
—
Power Steering
Reservoir
We recommend you use MOPAR ®
Power Steering Fluid +4 or
MOPAR ® ATF+4 ® Automatic
Transmission Fluid.
—
MAINTAINING YOUR VEHICLE
90