Using homelink, Power inverter, Electronics – Jeep 2013 Grand Cherokee - User Guide User Manual

Page 86

Advertising
background image

Using HomeLink®

• To operate, press and release the programmed HomeLink

®

button. Activation will

now occur for the programmed device (i.e., garage door opener, gate operator, security
system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the
device may also be used at any time.

WARNING!

• Your motorized door or gate will open and close while you are programming the

universal transceiver. Do not program the transceiver if people or pets are in the
path of the door or gate.

• Do not run your vehicle in a closed garage or confined area while programming

the transceiver. Exhaust gas from your vehicle contains Carbon Monoxide (CO)
which is odorless and colorless. Carbon Monoxide is poisonous when inhaled
and can cause you and others to be severely injured or killed.

POWER INVERTER

• There is a 115 Volt, 150 Watt power

inverter outlet located on the back of
the center console. This outlet can
power cellular phones, electronics and
other low power devices requiring
power up to 150 Watts.

• Press the switch located in the switch

bank on the lower instrument panel to
turn the power inverter on. The indica-
tor light will turn on to indicate the
inverter is producing AC power.

• Press the switch again to turn the power

inverter off. The indicator light will turn
off.

ELECTRONICS

84

Advertising
This manual is related to the following products: