Jeep 2013 Wrangler - Owner Manual - Manual (Page 207)

8. Using the plastic reinforcement as a handle remove the
tether strap from the bracket hook by sliding strap up
off hook and slide down the side bow (both sides).
9. Button the side bow tether strap (both sides).
10. Remove the swing gate bar (black metal bar for bottom
of rear window) and set aside.
NOTE: Be sure the wire harness in the left rear corner is
not tangled in the soft top bows before you lift the top.
11. Unsnap and remove the black boot cover. This cover
should be discarded. It was intended as a protective
cover for shipping only.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205