Electronic roll mitigation (erm) – Jeep 2014 Compass - Owner Manual User Manual

Page 373

Advertising
background image

WARNING! (Continued)

The BAS cannot prevent collisions, including those

resulting from excessive speed in turns, driving on
very slippery surfaces, or hydroplaning.

The capabilities of a BAS-equipped vehicle must

never be exploited in a reckless or dangerous
manner which could jeopardize the user’s safety or
the safety of others.

Electronic Roll Mitigation (ERM)

This system anticipates the potential for wheel lift by
monitoring the driver’s steering wheel input and the
speed of the vehicle. When ERM determines that the rate
of change of the steering wheel angle and vehicles speed
are sufficient to potentially cause wheel lift, it applies the
brake of the appropriate wheel and may also reduce

engine power to lessen the chance that wheel lift will
occur. ERM will only intervene during very severe or
evasive driving maneuvers.

ERM can only reduce the chance of wheel lift occurring
during severe or evasive driving maneuvers. It can not
prevent wheel lift due to other factors such as road
conditions, leaving the roadway or striking objects or
other vehicles.

NOTE:

Anytime the ESC system is in the “Full Off”

mode, ERM is disabled. Refer to “Electronic Stability
Control (ESC)” in this section for a complete explanation
of the available ESC modes.

WARNING!

Many factors, such as vehicle loading, road condi-
tions and driving conditions, influence the chance

(Continued)

5

STARTING AND OPERATING

371

Advertising