Resetting the auto up feature, Window lockout button – Jeep 2014 Grand Cherokee SRT - Owner Manual User Manual

Page 47

Advertising
background image

Resetting The Auto Up Feature

Should the Auto Up feature stop working, the window
probably needs to be reset. To reset Auto Up:

1. Pull the window switch up to close the window

completely and continue to hold the switch up for an
additional two seconds after the window is closed.

2. Push the window switch down firmly to the second

detent to open the window completely and continue
to hold the switch down for an additional two seconds
after the window is fully open.

Window Lockout Button

The Window Lockout button on the driver’s door allows
you to disable the window controls on the rear doors. To
disable the window controls on the rear doors, push the
Window Lockout button. To enable the window controls,
push the Window Lockout button again.

Window Lockout Button

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

45

Advertising