CyberPower Systems UP825 - Manual (Page 5)

UP625/ UP825
Guaranteed Uninterruptible Power System
◆ Power Button
Press the power button to turn the UPS ON or OFF
◆ Power On Indicator
This LED is illuminated when the utility condition is normal and the UPS
outlets are providing “clean power”, free of surges and spikes.
◆ Using Battery Indicator
This illuminates during utility failure, indicating that the battery is
supplying power to the battery-power supplied outlets.
◆ Battery Backup and Surge Protection Outlets
Provides three battery powered and surge protected outlets for
connected equipment to insure temporary uninterrupted operation
during a power failure and protection against surges and spikes.
◆ Surge Protection Outlets
Provides three surge protected only outlets for connected equipment.
◆
Circuit Breaker Reset for Overload Protection
Resetable circuit breakers provide optimal overload protection. When
an overload occurs, the circuit breaker will pop and the UPS will switch
to battery back-up mode. Unplug at least one item from the UPS and
press the circuit breaker in to reset it.
◆ Serial Port to PC
This port allows connection and communication from the DB-9 serial or
USB port on the computer to the UPS unit. The UPS communicates
its status to the PowerPanel Plus™ software. This interface is also
compatible with the UPS service provided by Windows NT, Windows
2000 and Windows XP.
◆ Network Protection Ports (RJ45/RJ11)
These ports protect standard network cables and telephone cables.
3