Auto lock doors — if equipped, Auto lock doors programming – Jeep 2015 Compass - Owner Manual User Manual

Page 34

Advertising
background image

Auto Lock Doors — If Equipped
The auto door lock feature default condition is enabled.

When enabled, the door locks will lock automatically

when the vehicle’s speed exceeds 15 mph (24 km/h).
Auto Lock Doors Programming
The Automatic Door Locks feature can be enabled or

disabled as follows:

• For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Electronic Vehicle

Information Center (EVIC) — If Equipped/Personal

Settings (Customer Programmable Features)” in “Un-

derstanding Your Instrument Panel” for further infor-

mation.

• For vehicles not equipped with the EVIC, perform the

following procedure:

1. Close all doors and place the key in the ignition

switch.

2. Within 15 seconds, cycle the ignition switch be-

tween LOCK and ON/RUN and then back to

LOCK four times, ending up in the LOCK position

(do not start the engine).

3. Within 30 seconds, push the power door LOCK

switch to lock the doors.

4. A single chime will indicate the completion of the

programming.

5. Repeat these steps if you want to return this feature

to its previous setting.

NOTE:

• If you do not hear the chime, it means that the system

did not enter the programming mode and you will

need to repeat the procedure.

• Use the Automatic Door Lock feature in accordance

with local laws.

32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising