Clock setting, Equalizer, balance and fade, Radio operation – Jeep 2015 Compass - User Guide User Manual

Page 43: Electronics

Advertising
background image

Clock Setting

1. Push and hold the TIME button until the hours blink.
2. Turn the TUNE/SCROLL control knob to set the hours.
3. Push the TUNE/SCROLL control knob until the minutes begin to blink.
4. Turn the TUNE/SCROLL control knob to set the minutes.
5. Push the TUNE/SCROLL control knob to save the changes.
6. Push any button/knob or wait five seconds to exit.

Equalizer, Balance And Fade

1. Push the TUNE/SCROLL control knob and “BASS” will display.
2. Rotate the TUNE/SCROLL control knob to select the desired setting.
3. Continue pushing the TUNE/SCROLL control knob to display and set “MID

RANGE,” “TREBLE,” “BALANCE” and “FADE.”

Radio Operation

Seek Up/Down Buttons
• Push to seek through radio stations in AM, FM, or SAT bands.
• Hold either button to bypass stations without stopping.

Store Radio Presets
• Push the SET/RND or SET (depending on the radio) button once and SET 1 will

show in the display. Then select a preset button (1–6).

• A second station may be added to each push button. Push the SET/RND or SET

(depending on the radio) button twice and SET 2 will show in the display. Then
select a preset button (1–6).

Music Type

NOTE:
The Music Type function only operates when in FM mode.
• Push the MUSIC TYPE button to activate this mode. Push the MUSIC TYPE button

again or turn the TUNE/SCROLL control knob to select the desired music type
(Adult Hits, Country, Jazz, Oldies, Rock, etc.).

• When a music type is chosen and the Music type is displayed, Push either SEEK

button and the radio will only search for stations with the selected music type.

SETUP Button
• Pushing the SETUP button allows you to select between items that are available

in that particular mode.

• Turn the TUNE/SCROLL control knob to scroll through the entries. Push the

AUDIO/SELECT button to select an entry and make changes.

ELECTRONICS

41

Advertising