Windshield wiper operation, Intermittent wiper system – Jeep 2015 Grand Cherokee - Owner Manual User Manual

Page 178

Advertising
background image

Windshield Wiper Operation

Rotate the end of the lever to one of the first four detent

positions for intermittent settings, the fifth detent for low

wiper operation and the sixth detent for high wiper

operation.

CAUTION!

Always remove any buildup of snow that prevents
the windshield wiper blades from returning to the
“park” position. If the windshield wiper switch is
turned off, and the blades cannot return to the “park”
position, damage to the wiper motor may occur.

Intermittent Wiper System

Use one of the four intermittent wiper settings when

weather conditions make a single wiping cycle, with a

variable delay between cycles, desirable. At driving

speeds above 10 mph (16 km/h), the delay can be

regulated from a maximum of approximately 18 seconds

between cycles (first detent), to a cycle every one second

(fourth detent).

Windshield Wiper Operation

176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising