Instrument cluster descriptions – Jeep 2015 Wrangler - Owner Manual User Manual

Page 310

Advertising
background image

INSTRUMENT CLUSTER DESCRIPTIONS
1. Fuel Gauge

The pointer shows the level of fuel in the fuel tank when

the ignition switch is in the ON/RUN position.
2. Charging System Light

This light shows the status of the electrical charg-

ing system. The light should come on when the

ignition switch is first turned to ON/RUN and remain on

briefly as a bulb check. If the light stays on or comes on

while driving, turn off some of the vehicle’s nonessential

electrical devices or increase engine speed (if at idle). If

the charging system light remains on, it means that the

vehicle is experiencing a problem with the charging

system. Obtain SERVICE IMMEDIATELY. See an autho-

rized dealer.
If jump starting is required, refer to “Jump Starting

Procedures” in “What To Do In Emergencies.”

3. Front Fog Light Indicator — If Equipped

This indicator will illuminate when the front fog

lights are on.

4. Low Fuel Warning Light

When the fuel level reaches approximately 2.8 gal

(10.6 L), this light will turn on and a single chime

will sound.
5. Speedometer

Indicates vehicle speed.
6. Front Axle Lock Indicator — If Equipped

Indicates when the front axle lock has been

activated.

308 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising