Parts included with k-swap fuel line kit, Additional parts needed, Additional parts recommend – Karcepts KFL02 User Manual
Page 2
Parts Included With K-Swap Fuel Line Kit
DESCRIPTION
QTY
-6AN BANJO FITTING WITH CRUSH WASHERS
1
HIGH PRESSURE FEED LINE
1
-8AN TO -6AN SWIVEL ADAPTER & O-RINGS
1
-6AN PLUG & O-RING
1
-6AN UNION & O-RING
1
LOW PRESSURE RETURN LINE
1
INTAKE AIR BYPASS CONTROL THERMAL VALVE PLUG
1
RUBBER CAP
1
HOSE CLAMPS
2
Additional Parts Needed
Karcepts Fuel Rail (P/N: KFR01, KFR02, or KFR03)
AEM 25-302 Fuel Pressure Regulator
Karcepts Throttle Cable Bracket or Cruise Control Delete Kit
Teflon Tape
Additional Parts Recommend
Fuel Pressure Gauge; 0-100 PSI; 1/8" NPT Center Back Connection
Walbro 255LPH HP Fuel Pump + Install Kit
Note: Read all instructions before attempting installation.
If you do not believe you are qualified in performing the
necessary installation, please find an experienced
professional who can. Karcepts, Inc. will not be held
responsible for improper installation.