Kendon STAND-UP BIKE LIFT User Manual
Page 5
714‐630‐7144
www.KendonUSA.com
- 14 -
714‐630‐7144
www.KendonUSA.com
- 3 -
Assembly Instructions
Tools required: Snap ring pliers
Your Lift comes completely assembled, except for the following:
Tie Down Hook Assemblies
Note: The Cruiser and Chopper Lift models do not require front hook assembly
as these hooks are welded to the rail assembly.
Attach tie down hooks, front (shorter assembly) with supplied snap rings.
You will find four tie-down hook assemblies in your Lift packaging. Simply slide
the shorter tie down hook assemblies onto the round bar connecting the rail to
the scissor mechanism. Locate the snap rings on the snap ring groove to retain
the tie down hook assemblies in place.
Attach tie down hooks, rear (longer assembly) with supplied snap rings
Repeat process with the rear tie down hook assemblies. These are the longer
of tie down hook assemblies.
Front Rail Assembly
Attach Front rail hoop with 5/16 diameter quick release pins.