Kontron CP3003-V uEFI BIOS - Manual (Page 48)

The uEFI Shell CP3003-SA/CP3003-V uEFI BIOS
Page 42 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
6.2.2 kboardconfig uEFI Shell Command
kboardconfig
FUNCTION: Configure the non-volatile board settings
SYNTAX: kboardconfig [-?][-b][-nc] <option> <parameter>
where:
? Used to show HELP
-b Used to invoke page break in the display output
-nc Used to disable color
<option> Used to select option
<parameter> Used to specify parameter for option selected
The command notation above indicates only the possible modifiers and
not the command’s syntax logic.
There are eight defined variations of this command:
kboardconfig lists options and their current status
kboardconfig -b lists options, their current status, and in-
vokes page breaks in the display output
kboardconfig -nc lists options, their current status, and dis-
ables color in the display output
kboardconfig -? provides HELP information
kboardconfig -? -b provides HELP information and invokes
page breaks in the display output
kboardconfig <option> provides HELP for option specified and the
current status of the option
kboardconfig <option> -nc provides HELP for option specified, the
current status of the option, and disables
color in display output
kboardconfig <option> <parameter>
sets the <parameter> to be used with the
<option> specified
DESCRIPTION: The kboardconfig command is used to configure non-volatile board
settings. For information on default settings, refer to Chapter 5.7,
Restore Defaults, and Chapter 6.2.6, kclearnvram uEFI Shell
Command.