Kontron CP3002 - Manual (Page 32)

Introduction CP3002
Page 1 - 12 ID 1042-9252, Rev. 2.0
P R E L I M I N A R Y
Interfaces
Serial Two 16C550-compatible UARTs:
• COMA available on the 8HP expansion module or on rear I/O
• COMB available on rear I/O only
Serial ATA Serial ATA Host Controllers integrated in the Intel® QM57 chipset:
• Provide support for six SATA ports, two onboard, two on rear I/O, and
two on the 8HP extension module
• Data transfer rates up to 300 MB/s
• High-performance RAID 0/1/5/10 functionality on all SATA ports
I/O Expansion Inter-
faces I/O expansion to 8HP board version:
• 2x SATA
• 2x USB2.0
• DP (DisplayPort)
• COMA
• Monitor and control signals
• LPC
• HDA
• PCI Express
Sockets
Front Panel Connectors
• VGA: 15-pin D-Sub connector
• USB: two 4-pin, type A connectors
• Ethernet: dual RJ-45 connector
Onboard Connectors • 7-pin, L-form standard SATA II connector, J3
• High-speed I/O extension connector, J12
• SPI extension connector, J4
• 18-pin extension connector for SATA Flash module (SSD), J5
• JTAG connector, J13
• XDP-SFF (debug) connector, J14
• CompactPCI Connectors J1 and J2
• Two 204-pin DDR3 SODIMM sockets
LEDs
LEDs Watchdog and Overtemperature Status LEDs:
• WD (green): Watchdog Status
• TH (red/green): Overtemperature Status
General Purpose LEDs:
• LED0..3 (red/green/red+green): General Purpose / POST Code
Ethernet LEDs:
• ACT (green): Network / Link Activity
• SPEED (green/orange): Network Speed
Table 1-1: CP3002 Main Specifications (Continued)
FEATURES SPECIFICATIONS