Kontron CP371 - Manual (Page 60)

System Considerations CP371
Page 5 - 4 © 2002 PEP Modular Computers GmbH ID 23762, Rev. 02
5.4 Process-side Signal Conditioning
Considerations:
1. Input signals presented to the CP371 must be within the ranges specified for the signal
type or erroneous results will occur as well as possible damage to the CP371.
2. Ensure that when analog ground pins on CON2 are used that on the process side no
grounding loops are created. Refer to chapter 4 for further information.
5.5 Cable Interfacing
Considerations:
1. No modification to the CP371 itself is permitted (i.e. connector pin shorting).
2. If necessary, cabling to the CP371 CON2 connector should physically fixed to prevent
strain on the CON2 connector.