Kontron CPS3410 - Manual (Page 8)

D R A F T — F O R I N
T E R N A L U S E O N L Y
8 www.kontron.com
User Guide
CPS3410
1.3 Technical Specif ication
Table 1: CPS3410 Main Specifications
FEATURES SPECIFICATIONS
Co
nnect
or
s
Gigabit Ethernet Four 10 Base-T/100 Base-TX/1000 Base-T Gigabit Ethernet interfaces based on the
Intel® I350 Ethernet controller. The interfaces are implemented as four front
panel RJ-45 connectors with status LEDs, J7, J8, J9, and J10.
CompactPCI Serial CompactPCI Serial interface on connectors P1:
» Compliant with PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specification
» Support for one x4 PCI Express 2.1 interface
One optional CompactPCI Serial connector P6 for increased mechanical stability
Hot Sw
ap
Hot Swap Hot swap handle with integrated hot swap switch for shutting down the power sup-
plies in order to safely remove the CPS3410 from the system
LEDs
Front Panel LEDs Integral Ethernet LEDs:
» ACT /LNK(green): Ethernet Link/Activity
» SPEED (orange): 1000Base-T
» SPEED (green): 100Base-Tx
» SPEED (off) + ACT (on): 10Base-T
Power Status LEDs:
» Pwr (green): Power Status of the CPS3410
Ge
ner
al
Mechanical 3U, 4 HP, CompactPCI Serial-compliant form factor
Power Consumption CPS3410 with no Ethernet port connected: approx. 2.5 W
Additionally per 1000 MB/s Ethernet port connected: approx. 0.5 W
Power Supply +12V DC in accordance with the CompactPCI® Serial Specification
Temperature Range Operational: 0°C to +60°C Standard
-40°C to +85°C Extended
Storage: -40°C to +85°C
Recommended Airflow Volumetric Flow Rate: > 5 cfm
Sufficient airflow must be provided to ensure optimal operation and long-term
reliability of the CPS3410.
Climatic Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 100 mm x 160 mm
Board Weight 170 grams