3 hardware description, 1 1000base-t ports, Hardware description – Kontron CP-RIO6-923 User Manual
Page 23: Table 3-1: ethernet port mapping, 3hardware description
Hardware Description
9
CP-RIO6-923 User Guide
www.kontron.com
3
Hardware Description
This chapter describes the board specific features of the CP-RIO6-923. The building blocks are:
• 12 or 24 1000Base-T ports
• Serial RS232 console connector
• CompactPCI bus connectors
The RIO module does not require a power supply. There are no active components on the board.
3.1 1000BASE-T Ports
Three Integrated Connector Modules (network magnetics + RJ45) are the physical interface for the 10/100/
1000Base-T ports:
• three 2x4 modules for the dual-slot version
• three 1x4 modules for the single-slot version
The dual-slot version supports PICMG 2.16 backplane ports FL1 to FL23 and FLf (Fabric to Fabric Link Port).
The single-slot version supports FC12 to FL23 and FL15 to FL23 on the CP-RIO6-923-9. The switch interfaces
which are accessible via the CP-RIO6-923 are listed in the following table.
Table 3-1:
Ethernet Port Mapping
PICMG 2.16 Backplane
Port
CP-RIO6-923 Dual-
Slot Port Label
CP-RIO6-923 Single-
Slot Port Label
CP-RIO6-923-9
Single-Slot Port
Label
FL_f
Fx
-
-
FL_01
1x
-
-
FL_02
2x
-
-
FL_03
3x
-
-
FL_04
4x
-
-
FL_05
5x
-
-
FL_06
6x
-
-
FL_07
7x
-
-
FL_08
8x
-
-
FL_09
9x
-
-
FL_10
10x
-
-
FL_11
11x
-
-
FL_12
12x
12x
(12x) -
FL_13
13x
13x
(13x) -
FL_14
14x
14x
(14x) -
FL_15
15x
15x
15x
FL_16
16x
16x
16x
FL_17
17x
17x
17x