Kontron CP6004-RC - Manual (Page 23)

CP6004-RA/-RC Introduction
ID 1055-1509, Rev. 1.0 Page 1 - 3
D R A F T — F O R I N T E R N A L U S E O N L Y
1. Introduction
1.1 Board Overview
The CP6004-RA (Rugged Air-Cooled) / CP6004-RC (Rugged Conductive-Cooled) is a highly
integrated 6U CompactPCI system controller board based on the 3
rd generation Intel® Core™
i7 processor combined with the mobile Intel® QM77 Express Chipset.
The board supports the 3 rd generation, Intel® Core™ i7-3612QE quad-core processor with
2.1 GHz and the Intel® Core™ i7-3555LE dual-core processor with 2.5 GHz. All processors
are built on 22-nm technology and provided in a BGA package.
The CP6004-RA/-RC includes up to 16 GB dual-channel DDR3 soldered memory with Error
Checking and Correction (ECC) running at 1600 MHz. Furthermore, up to 64 GB NAND flash
memory (SSD) via a SATA Flash module can be integrated into the CP6004-RA/-RC.
The CP6004-RA has a front panel and comes with various interfaces such as up to five Gigabit
Ethernet ports (three on front I/O and up to four on rear I/O in compliance with PICMG 2.16), four
high-resolution graphics interfaces (DisplayPort, VGA, 2 x HDMI/DVI), two COM ports (RS-232
on front and rear I/O, RS-422/RS-232 on rear I/O), and five SATA interfaces with RAID 0/1/5/10
functionality, one for the SATA Flash module and four for rear I/O. In addition, six USB 2.0 ports,
two on front I/O and four on rear I/O as well as four general purpose inputs (GPI) and four gen-
eral purpose outputs (GPO) are available on the board. The CP6004-RA provides support for
one standard PMC/XMC module either via one 64-bit/66 MHz PCI or 64-bit/133 MHz PCI-X
PMC interface or via one XMC interface utilizing a x8 lane PCI Express 2.0 interconnection.
The CP6004-RC has no front panel and provides various interfaces such as four Gigabit
Ethernet ports on rear I/O in compliance with PICMG 2.16, three high-resolution graphics in-
terfaces (VGA, 2 x HDMI/DVI), two COM ports (RS-232 and RS-422 /RS-232 on rear I/O), and
five SATA interfaces with RAID 0/1/5/10 functionality, one for the SATA Flash module and four
for rear I/O. In addition, four USB 2.0 ports on rear I/O as well as four general purpose inputs
(GPI) and four general purpose outputs (GPO) are available on the board. The CP6004-RC
provides support for one conduction-cooled PMC (CCPMC) / one conduction-cooled XMC ei-
ther via one 64-bit/66 MHz PCI or 64-bit/133 MHz PCI-X PMC interface or via one XMC inter-
face utilizing a x8 lane PCI Express 2.0 interconnection.
The CP6004-RA/-RC supports a configurable 64-bit/66 MHz PCI or PCI-X hot swap Compact-
PCI interface. When installed in the system slot, the interface is enabled, and when installed in
a peripheral slot, the CP6004-RA/-RC is isolated from the CompactPCI bus. Safety and secu-
rity features via a Trusted Platform Module (TPM) 1.2 are provided on request. Intelligent Plat-
form Management Interface (IPMI) is supported as well.
The CP6004-RA/-RC has an extended operating temperature range and is ruggedized for high
shock and vibration environments. The CP6004-RA provides a heat sink optimized for air cool-
ing. The CP6004-RC provides a heat spreader extending across the whole board to enable the
heat to be conducted from the board to the chassis. On the CP6004-RC two wedge locks are
available for mounting the board in the chassis.
Designed for stability, the board fits into applications situated in industrial environments, includ-
ing I/O intensive applications where only one slot is available for the CPU, making it a perfect
core technology for long-life applications. Components with high temperature tolerance have
been selected from embedded technology programs, and therefore offer long-term availability.
The board is offered with various Board Support Packages including Windows, VxWorks and
Linux operating systems. For further information concerning the operating systems available
for the CP6004-RA/-RC, please contact Kontron.