Kontron VM162 - Manual (Page 88)

Appendix SI6 Piggybacks
Page SI6- 4 © PEP Modular Computers Juli 23, 1997
3 SI6-10BT
The SI6-10BT is a physical twisted pair (10BaseT) interface to the 68EN360 Controller chip. It connects one of the range
of PEP CPU boards to an unshielded 100
Ω
twisted pair cable via an RJ45 telephone jack.
The SI6-10BT has two LEDs fitted; a red LED indicates collision detection and a yellow LED for data.
3.1 Specifications
3.2 Connector
On-board termination
Max. Baud Rate
100
Ω
10 Mbit/s as specified by Ethernet
Pin No. Signal
1 TD+
2
TD+
3 RD+
4 Not connected
5 Not connected
6 RD-
7 Not connected
8 Not connected
Col Tx
10BaseT
ETHERNET
Collision
Data
RJ45 Connector
Pin 1
Pin 8