Kontron AT8901M - Manual (Page 21)

AT8901M Introduction
Page 1 - 8 AT8901M User Guide
General
Safety Designed to meet or exceed the following:
• UL 60950, 3rd edition
• EN 60950
• LVD 73/23/EEC
• Denan Law
EMC Designed to meet or exceed the following:
• FCC 47 CFR Part 15, Subpart B
• EN55022, EN55024
• EN 300 386
Reliability • MTBF: >170,000 hours @ 40°C / 104°F (Telcordia SR-332, Issue 1)
HW Mon
itoring
LEDs • ATCA LEDs:
• 4 LEDs ("Ready for Hot Swap", "Out of Service", "Healthy", "Heart Beat")
• Ethernet:
• Shielded RJ-45 connectors with integrated LED's
• Base Ports :
• 4x Shielded RJ-45 connectors with integrated LED's
• User LEDs:
• 4 LEDs ("Base Status", "Base Selected", 2x not used )
• Switch LEDs:
• 16 LEDs (activity and link status for base channels)
Board Management • Based on IPMI 1.5
• FRU Management
• Sensors (Voltage, Current, Temperature, Fuse)
• Status and Alerting
• Hot Swap
• Electronic Keying of Base Interfaces
Table 1-3: AT8901M Main Specifications (Continued)
AT8901M SPECIFICATIONS