Kontron KT-PCIe-DVI-HDMI-I - Manual (Page 10)

KTD-N0800-0 Page 10
KT-PCIe-DVI-HDMI-I Users Guide
5 Cable Kit
DVI Converter PCB is attached as a brake off module to the KT-PCIe module.
The converter contains two connectors to convert from DVI-SIL (Hirose DF19L-20P-1H) to DVI-I.
The KT-PCIe-modules includes DVI cable 300mm long (PN. 821524) in order to convert the SIL-DVI
connector to a DVI-I connector.
The cable wiring is a one-to-one connection.
The DVI-I connector is a Molex 74320-1004 (or similar).
Only DVI Digital output is supported.
(Both DVI-I and DVI-D cables can be connected).
DVI-SIL
PIN
DVI-I
PIN
Signal
1 - GND
2 - GND
3 14 +5V (55mA)
4 16 Hot Plug Detect
5 15 GND
6 7 DDC Data
7 6 DDC Clock
8 - GND
9 24 TMDS Clock-
10 23 TMDS Clock+
11 22 GND
12 17 TMDS Data 0-
13 18 TMDS Data 0+
14 19 GND
15 9 TMDS Data 1-
16 10 TMDS Data 1+
17 11 GND
18 1 TMDS Data 2-
19 2 TMDS Data 2+
20 3 GND
1 8
9 16
17 24
C1 C2
C3 C4
C5 Front view
Cable Kit