Kontron KT965 Series - Manual (Page 30)

KT965 Family
KTD-00699-S Public User Manual Date: 2010-04-15 Page 30 of 90
4.3 Keyboard and PS/2 mouse connectors
Attachment of a keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and
keyboard connector (MSE & KBD).
Both interfaces utilize open-drain signaling with on-board pull-up.
The PS/2 mouse and keyboard is supplied from SB5V when in standby mode in order to enable keyboard or
mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A
resetable fuse.
4.3.1 Stacked MINI-DIN keyboard and mouse Connector (MSE & KBD)
Note
Pull
U/D Ioh/Iol Type Signal
PIN
Signal Type Ioh/Iol
Pull
U/D Note
- - - NC 6 5 MSCLK IOC TBD 2K7
- - PWR 5V/SB5V 4 3 GND PWR - -
- - - NC 2 1 MSDAT IOC TBD 2K7
- NC 6 5 KBDCLK IOC TBD 2K7
- - PWR 5V/SB5V 4 3 GND PWR - -
- - - NC 2 1 KBDDAT IOC TBD 2K7
Signal Description – Keyboard & and mouse Connector (MSE & KBD), see below.
4.3.2 Keyboard and mouse pin-row Connector (KBDMSE)
PIN
Signal Type Ioh/Iol
Pull
U/D Note
1 KBDCLK IOC TBD 4K7
2 KBDDAT IOC TBD 4K7
3 MSCLK IOC TBD 4K7
4 MSDAT IOC TBD 4K7
5 5V/SB5V PWR - -
6 GND PWR - -
Signal Description – Keyboard & and mouse Connector (KBDMSE).
Signal Description
MSCLK Bi-directional clock signal used to strobe data/commands from/to the PS/2 mouse.
MSDAT Bi-directional serial data line used to transfer data from or commands to the PS/2 mouse.
KDBCLK Bi-directional clock signal used to strobe data/commands from/to the PC-AT keyboard.
KBDDAT Bi-directional serial data line used to transfer data from or commands to the PC-AT keyboard.