Kontron KTQ77-FLEX User Manual
Ktq77/flex users guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- 1 Installation procedure
- 2 System Specification
- 3 Connector Locations
- 4 Connector Definitions
- 5 IO-Area Connectors
- 6 Internal Connectors
- 6.1 Power Connector (ATX/BTXPWR)
- 6.2 Fan Connectors (FAN_CPU) (J28) and (FAN_SYS) (J29)
- 6.3 PS/2 Keyboard and Mouse connector (KBDMSE) (J15)
- 6.4 Display connectors (Internal)
- 6.5 SATA (Serial ATA) Disk interface (J22 – J27)
- 6.6 USB Connectors (USB)
- 6.7 Serial COM2 – COM4 Ports (J19, J20, J21)
- 6.8 Audio Connectors
- 6.9 Front Panel Connector (FRONTPNL) (J36)
- 6.10 Feature Connector (FEATURE) (J30)
- 6.11 ”Load Default BIOS Settings” Jumper (J11)
- 6.12 ClrRTC (J12)
- 6.13 SPI Recover Jumper (J41)
- 6.14 SPI Connector (SPI) (J40)
- 6.15 XDP-CPU (Debug Port for CPU) (J14)
- 6.16 XDP-PCH (Debug Port for Chipset) (J13)
- 7 Slot Connectors (PCIe, mSATA, miniPCIe, PCI)
- 8 On-board - & mating connector types
- 9 System Resources
- 10 BIOS
- 10.1 Main
- 10.2 Advanced
- 10.2.1 Advanced - PCI Subsystem Settings
- 10.2.2 Advanced - APCI Settings
- 10.2.3 Advanced - Trusted Computing
- 10.2.4 Advanced - CPU Configuration
- 10.2.5 Advanced - SATA Configuration
- 10.2.6 Advanced - Intel ® Rapid Start Technology
- 10.2.7 Advanced - Intel TXT (LT) Configuration
- 10.2.8 Advanced - Intel ® Anti-Theft Technology Configuration
- 10.2.9 Advanced - AMT Configuration
- 10.2.10 Advanced - Acoustic Management Configuration
- 10.2.11 Advanced - USB Configuration
- 10.2.12 Advanced - SMART Settings
- 10.2.13 Advanced - Super IO Configuration
- 10.2.14 Advanced - Voltage Monitor
- 10.2.15 Advanced - Hardware Health Configuration
- 10.2.16 Advanced - LAN Configuration
- 10.2.17 Advanced - Delay Startup
- 10.2.18 Advanced - Serial Port Console Redirection
- 10.2.19 Advanced - CPU PPM Configuration
- 10.3 Chipset
- 10.4 Boot
- 10.5 Security
- 10.6 Save & Exit
- 11 AMI BIOS Beep Codes
- 12 OS Setup