Kontron KTH81-mITX - Manual (Page 96)

KTD-N0882-H Page 96 BIOS - Security
KTQ87/KTH81 Users Guide
TPM Configuration
Phoenix SecureCore Technology Setup
Security
TPM Configuration Item Specific Help
Current TPM State
TPM Action
Omit Boot Measurements
[Enabled and Activate]
[ No Change ]
[Disabled]
Enact TPM Action. Note: Most
TPM actions require TPM to be
Enabled to take effect.
F1 Help ↑↓ Select Item +/- Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit
Function Selection Description
TPM Action
No Change
Enable
Disable
Activate
Deactivate
Clear
Enable and Activate
Disable and Deactivate
Set Owner Install, with State=True
Set Owner Install, with State=False
Enable, Activate, and Set Owner Install, with State=True
Disable, Deactivate, and Set Owner Install, with State=False
Clear, Enable, and Activate
Require PP for provisioning
Do not require PP for provisioning
Require PP for clear
Do not require PP for clear
Enable, Activate, and Clear
Enable, Activate, Clear, Enable, and Activate
Enact TPM Action. Note:
Most TPM actions require
TPM to be Enabled to take
effect.
TPM Support
Disabled
Enabled
Enabling this option
causes the system to omit
recording boot device
attempts in PCR[4].