4jili30 cable (examples) – Kontron KTD-S0018-A User Manual
Page 7
KTD-S0018-A Page
5
JILI30 Cable (Examples)
Display Cable Guide
4
JILI30 Cable (Examples)
The following chapter describes the wiring of a JILI30 cable on two examples. KONTRON recommends that
the differential pairs should be twisted together to minimize crosstalk on the signal lines. It may seems as
if JILI30 cables are made for a specific display resolution. This is only particularly true.
The decision which cable can be used depends on the following criterias:
➤
Display connector type
➤
Pinout of display connector
➤
Number of channels/clocks (single or dual channel LVDS)
➤
Color depth (18 or 24 bit) respectively number of LVDS data pairs
4.1
KAB-JILI30-TXLD03
This cable can be used for single channel displays with 24 bit color depth (example SHARP LQ150X1LW71).
Displays with an 18 bit single channel interface might also work depending on the color mapping of the
display.
Display-Side
300mm (
± 10mm)
Single Board Computer
Ax
x62514yww
Cabletype: AWG30,
UL-Style 20744 and RoHS compatible
16 Wires
Twisted-Flat wires
(Color-Coded or color-marked Pin1-wire)
Pin1