Kontron pITX-E38 User Manual
Kontron Hardware
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Installation Procedure
- 3 System Specifications
- 4 Connector Locations
- 5 Connector Definitions
- 6 IO-Area Connectors
- 7 Internal Connectors
- 7.1 Internal Power Connector (Vin Int.)
- 7.2 Fan Connector (Fan)
- 7.1 LVDS Flat Panel Connector (LVDS)
- 7.2 SATA (Serial ATA) Disk interface (SATA0)
- 7.3 USB Connectors (USB2 and USB3)
- 7.4 Serial COM1 – COM2 Ports (COM1, COM2)
- 7.5 Audio Connector
- 7.6 Front Panel Connector (FRONTPNL)
- 7.7 Battery Module
- 7.8 SBC-GPIO Connector (SBC-GPIO)
- 7.9 SBC-External battery (SBC-Ext-Bat)
- 7.10 Clear CMOS (CLR-CMOS)
- 7.11 “Always On” (Always On)
- 7.12 SPI Connector (SPI)
- 7.13 XDP (XDP)
- 8 Slot Connectors (mPCIe, mSATA, MicroSD card)
- 9 On-board - & mating connector types
- 10 BIOS