2 power out connector (powerout - j32), Power out connector (powerout - j32), Power out connector (powerout - j32) 7.2 – Kontron mITX-E38 User Manual
Page 25
KTD-N0903-A
Page 23
Internal Connectors
mITX-E38 Users Guide
Power Out Connector (PowerOut - J32)
7.2
The Power Out connector can be used to power source external devices like HDD. The connector is type
Molex 22-23-2041 or similar.
Header
Pin
Signal
Description
Type
1
5V
Power +5V
PWR
2
GND
Ground
PWR
3
GND
Ground
PWR
4
12V
Power +12V
PWR
Warning: Hot Plugging power supply is not supported. Hot plugging might damage the board.
Available cable kit:
PN 1027-3669 Cable Power Out
Notes:
To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.