Kontron AM4520 Manual - Manual (Page 18)

1.3 Board Specifications
FEATURES DESCRIPTION
Compliancy
• AMC.0 R1.0
• AMC.3 R1.0
IPMI Features
• Management Controller compliant to PICMG 3.0, AMC.0 R1.0 and IPMI v1.5 rev 1.1.
• Management Controller is run time field reprogrammable without payload impact.
• Robust fail safe reprogramming implementation (which includes two firmware images) that
could perform automatic or manual rollback if a problem occurs during critical reprogramming
phase.
• Remote upgrade capability from all IPMI interfaces (via IPMB).
• Management Controller self test which can detect failure under its code integrity and trig an
automatic rollback.
Supervisory • Hardware system monitor through IPMI (voltages, currents, temperature),
temperature monitor / alarm; board temperature sensor, power failure.
Mechanical
• 181.5 x 75 x 30.16 mm, Single-width Full-height
• Weight: the weight is drive dependant
Power Requirements
• Management power is less than 100mA peak at 3.3V
• Payload power is drive dependant
Operating Storage and Transit
Temperature* 0-55°C/32-131°F -40 to +70°C/-40 to 158°F
Humidity* 15% to 90% @55°C/131°F
non-condensing 5% to 95% @ 40°C/104°F
non-condensing
Altitude* 4,000 m / 13,123 ft 15,000 m / 49,212 ft
Shock* 30G, half-sine 11ms, each axis Bellcore GR-63-CORE
Section 4.3
Environmental
Vibration* 1.0G, 5-500Hz each axis 0.5G, 5-50Hz;
3.0G, 50-500Hz each axis
Reliability • MTBF: > 895 000 hours @ 40°C / 104°F (Telcordia SR-332, Issue 1)
Safety/EMC
Meet or exceed:
•
Safety: UL 60950 3 rd Ed.; CSA C22.2 No 60950-00; EN 60950:2000; IEC60950-1
• EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024
Warranty Two year limited warranty
* Designed to meet or exceed
1-2
AM4520 User’s Guide