Kontron AM4211 - Manual (Page 24)

9 AM4211
www.kontron.com
2.3 eUSB Storage
The AM4211 supports one (1) Solid State Drive. It is a NAND flash disk module with a USB 2.0 interface. The
module is connected to a 2x5 header (refers to J6 on showed in Figure 2-2) on the AM4211 board.
Figure 2-2:AM4211 Quick Reference Sheet
Signal Path:
USB Flash Module Connector is located close to the heatsink and the memory socket.
J8
J6
J5
J4
JP1
TS2 TS1
TS3
Serial Port Connector
SFP+ Connector
DDR3 Memory Socket SO-DIMM ECC
eUSB Flash Connector
AMC Gold Fingers
J3
J4
J5
J6
J8
» AM4211 Quick Reference Sheet «
Connectors
Reserved JP1
Jumper Settings
Symbols Chart
Hot Swap
Out of Service
Healthy
Serial Port (RJ45)
LEDs Signification available on back.
Cavium Advanced Mezzanine Card
Top Side Sensor
SO-DIMM Sensor
Cavium Internal Sensor TS1
TS2
TS3
Temperature Sensors
J3
AM
421
1
1
20
SFP+