Kontron AM4020 - Manual (Page 22)

Introduction AM4020
Page 1 - 4 ID 1036-1863, Rev. 3.0
P R E L I M I N A R Y
1.2 Board-Specific Information
Due to the outstanding features of the AM4020, such as superior processing power and flexible
interconnect topologies, this AMC board provides a highly scalable solution not only for a wide
range of telecom and data network applications, but also for several highly integrated industrial
environment applications with solid mechanical interfacing.
Some of the AM4020's outstanding features are:
• Support for the following processors:
•
Intel® Core™ i7-610E (SV) processor with ECC, 2.53 GHz, 4 MB L3 cache
• Intel® Core™ i7-620LE (LV) processor with ECC, 2.0 GHz, 4 MB L3 cache
• Intel® QM57 Express Chipset
• Up to 8 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1066 MHz
• Integrated 3D high performance graphics controller
• Display support for resolutions up to 2560 x 1600 pixels @ 60 Hz
• AMC interconnection:
•
Dual Gigabit SerDes connection in the Common Options Region
• Dual SATA storage interface in the Common Options Region
• Two x4 or eight x1 PCI Express in the Fat Pipes Region (operates at 2.5 GT/s and as
a root complex controller only)
• Dual SATA storage interface in the Extended Options Region
• DisplayPort interface (on request) in the Extended Options Region
• Serial port in the Extended Options Region
• Debug port in the Extended Options Region
• Bidirectional PCI Express reference clock, FCLKA
• Full hot swap support
• One Quad Gigabit Ethernet Controller, 82580EB
• Onboard extension connector for a dedicated SATA Flash module with up to 32 GB
NAND Flash memory
• One mini USB 2.0 host port on Front I/O
• Two Gigabit Ethernet ports on Front I/O
• One Serial port (RS-232) or DisplayPort on Front I/O, depending on the front panel version
• TCG 1.2-compliant Trusted Platform Module (TPM), on request
• Two redundant SPI Flash chips for uEFI BIOS (2 x 8 MB)
• Dedicated IPMI Module Management Controller with redundant Firmware Flash (2 x 512 kB)
• Watchdog Timer
• JTAG interface for debugging and manufacturing
• Four bicolor User-Specific LEDs (providing debugging and POST code information, etc.)
• Two onboard DIP switches (for selecting the uEFI BIOS bank, overwriting E-Keying, etc.)
• Standard temperature range: -5°C to + 55°C
• Extended temperature range: -40°C to +70°C
• Thermal management
• Passive heat sink solution for forced airflow cooling
• Single Mid-size and Full-size AMC module
• Designed to be compliant with the following PICMG specifications:
• PICMG AMC.0 R2.0 Advanced Mezzanine Card Base Specification
• PICMG AMC.1 R2.0 PCI Express on AdvancedMC
• PICMG AMC.2 R1.0 Ethernet Advanced Mezzanine Card Specification
• PICMG AMC.3 R1.0 Advanced Mezzanine Card Specification for Storage
• PICMG MTCA.0 R1.0 Micro Telecommunications Computing Architecture Base Spec.
• PICMG MTCA.1 R1.0 Air Cooled Rugged MicroTCA Specification
• AMI Aptio®, a uEFI-compliant platform firmware