6 standards, Standards – Kontron AM4024e User Manual
Page 21
D R A F T — F O R I N
T E R N A L U S E O N L Y
21
www.kontron.com
User Guide
AM4024(E)
1.6 Standards
The AM4024(E) complies with the requirements of the following standards.
Note:
Boards
without conformal coating must not be exposed to a change of temperature which
can lead to condensation. Condensation may cause irreversible damage, especially when
the board is powered up again.
Kontron does not accept any responsibility for damage to products resulting from destruc-
tive environmental testing.
Please contact Kontron for assistance prior to performing further environmental testing of
the AM4024(E).
Table 3: Standards
TYPE
ASPECT
STANDARD
TEST LEVEL
CE
Emission
EN55022, EN61000-6-3, EN300386
--
Immission
EN55024, EN61000-6-2, EN300386
--
Electrical Safety
EN60950-1
--
Mechanical
Mechanical Dimensions IEEE 1101.10
--
Environmental and
Health Aspects
Climatic Humidity
IEC60068-2-78
93% RH at 40 °C,
non-condensing
(see note below)
WEEE
Directive 2002/96/EC
Waste electrical and electronic
equipment
RoHS 2
Directive 2011/65/EU
Restriction of the use of certain
hazardous substances in electri-
cal and electronic equipment
Vibration
(sinusoidal, operating)
GR-63-CORE
EN300019-2-3
IEC61131-2
IEC60068-2-6
5-150 [Hz] frequency range
1 [g] acceleration
1 [oct/min] sweep rate
10 sweeps/axis
3 directions: x, y, z
Shock (operating)
EN300019-2-3
IEC61131-2
IEC60068-2-27
15 [g] acceleration
11 [ms] pulse duration
3 shocks per direction
5 [s] recovery time
6 directions, ±x, ±y, ±z