Introduction, Specifications, 1 kab-adapt-lvdstottl – Kontron KAB-Adapt-LVDStoTTL User Manual
Page 5: 2 flex32 family, 3 jili30 family, 1 mechanical specifications
KAB-ADAPT-LVDStoTTL
3
2.
Introduction
2.1
KAB-ADAPT-LVDStoTTL
KAB-ADAPT-LVDStoTTL is converter from JILI30 interface to FELX32 System. KAB-ADAPT-LVDStoTTL is
used to connect VGA/SVGA panels to Kontron Embedded Modules flat panel controllers (aFLAT-, uFLAT-,
new MOPS-Series) with JILI30 interface.
2.2
FLEX32 Family
FLEX32 is a Kontron hardware standard that interfaces the host computer system via TTL (18-Bit) to
flat-panel displays.
2.3
JILI30 Family
JILI30 (Jumptec Intelligent LVDS Interface) is a Kontron hardware standard that interfaces the host
computer system via LVDS to flat-panel displays. The target displays are usually medium- to high-
resolution TFT displays with parallel (CMOS, non-LVDS) interfaces.
3.
Specifications
3.1
Mechanical Specifications
3.1.1
Cable lengthens
➤
300mm ±10mm
3.1.2
Module Dimensions (PCB)
➤
45x 35 mm
3.1.3
Weight
➤
20 g