Kontron KTC5520-EATX - Manual (Page 99)

83 KTC5520/EATX
www.kontron.com
5.4 Console Redirection (VT100 Mode)
The VT100 operating mode allows remote setup of the board. This configuration requires a remote terminal
that must be connected to the board through a serial communication link.
5.4.1 Requirements
The terminal should emulate a VT100 or an ANSI terminal. Terminal emulation programs such as Telix©,
HyperTherminal(Windows), minicom(Linux) or ProComm©(Windows) can also be used.
5.4.2 ANSI and VT100 Keystroke Mapping
Up <ESC>[A
Down <ESC>[B
Right <ESC>[C
Left <ESC>[D
Home <ESC>[H
End <ESC>[K
F1 <ESC>OP
F2 <ESC>OQ
F3 <ESC>OR
F4 <ESC>OT