Autostick, Autostick௡ operation – Chrysler 2007 300 SRT8 User Manual

Page 207

Advertising
background image

NOTE:

Even if the transmission can be reset, we

recommend that you visit a dealer at your earliest
possible convenience. Your dealer has diagnostic equip-
ment to determine if the problem could recur.

Have the transmission checked at your authorized dealer
as soon as possible.

If the problem has been momentary, the transmission can
be reset to regain all forward gears.

Permanent Transmission Limp Home Mode
Permanent Limp Home Mode will be activated if the
transmission enters temporary Limp Home Mode three
times. Follow the reset procedure described under “Tem-
porary Transmission Limp Home Mode” in this section.
In Permanent Limp Home Mode, P (Park), R (Reverse),
and N (Neutral) will continue to operate. Second gear
will operate in the D (Drive) shifter position. The mal-
function indicator light may illuminate.

AUTOSTICK

Autostick

௡ is a driver-interactive transmission that offers

manual gear shifting to provide you with more control of
the vehicle. Autostick

௡ allows you to maximize engine

braking, eliminate undesirable upshifts and downshifts,
and improve overall vehicle performance. This system
can also provide you with more control during passing,
city driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.

Autostick

Operation

By placing the selector lever in the D (Drive) position, it
can be moved from side to side. This allows the driver to
select a higher or lower range of gears. Moving the
selector lever to the Left (-) triggers a downshift and to
the Right (+) an upshift. The gear position will display in
the instrument cluster on the transmission range indica-
tor.

NOTE:

• In Autostick௡ mode, the transmission will only shift

up and down when the driver manually moves the
selector lever Right (D+) or Left (D-).

STARTING AND OPERATING

207

5

Advertising
This manual is related to the following products: