Serial interface, 14 serial interface – Kontron COMe Ref.Carrier T6 User Manual
Page 33
Advertising
COMe Reference Carrier Type 6
/ Connectors and Features
30
5.14 Serial Interface
The PICMG COM.0 specification revision 2.0 defines two optional 2-pin serial interfaces on COM Express® connector
pins A98/A99 and A101/A102 formerly used for 12V VCC input. SER0 and SER1 can be used as a serial COM port on
COMe Reference Carrier Type 6 at connector J109 and J102.
J109 and J102 allow SER0 and SER1 as 2-pin RS232 interface COMA with Kontron Adapter cable
check the documentation of your module if this interface is supported and how to configure.
Pin
J109 (COMA) / J102 (COMB)
1
n.c.
2
n.c.
3
RX
4
n.c.
5
TX
6
n.c.
7
n.c.
8
n.c.
9
GND
10
+5V
Advertising